The evolution of the computer keyboard: In pictures

Trace the ongoing development of techies' favorite input tool, from typewriter mimic to clacky workhorse to enhanced flat-screen.

IBM Model M keyboard

IBM Model M keyboard

Decades after its introduction in the mid-'80s, IBM's classic Model M remains a favorite for keyboard purists. But to really delve into the computer keyboard's past, let's ...

This slideshow accompanies our story . Click through to that story for many more details about the keyboard's history and future.

IBM Selectric typewriter
Steve Lodefink, CC by 2.0 (Creative Commons BY or BY-SA)

IBM Selectric typewriter

Introduced in 1961, the Selectric electric typewriter was an enormous influence on the modern computer keyboard. Admins grew to love the feel of the Selectric's keyboard, so many early computer keyboards mimicked it.

reed switch keyboard
© KeyTronicEMS

Reed-switch keyboard

An early '70s computer keyboard design incorporated reed switches, which work with a magnet and two metal filaments. When the magnetic field gets close enough, it pulls the filaments together to complete a circuit.

Keyboards like this deconstructed Key Tronic model housed circuit boards with 100 to 120 reed switches, each covered by a key. Underneath each key top was a tiny magnet. When someone depressed the key, the magnet made the filaments touch, thus generating an electrical signal for the desired character to type.

capacitive-switch keyboard
© KeyTronicEMS

Capacitive-switch keyboard

Keen to get away from unreliable reed switches, Key Tronic developed the capacitive switch in the late '70s. It worked by putting a little bit of aluminum under the key top. When the key was depressed, the foil changed the capacitance of the circuit board underneath, and a microprocessor registered a keystroke.

Here KeyTronic shows off the layers of its capacitive keyboards from the late '80s and early '90s.

IBM buckling spring keys
Amir Yalon, CC by 2.0 (Creative Commons BY or BY-SA)

Buckling-spring keyboard

In 1978, IBM received a patent for a "buckling spring" key mechanism that mimicked the feel of the old Selectrics. The mechanism worked with a small spring attached to non-parallel surfaces under the keycap.

The spring coiled normally when depressed but "buckled" to the side at the snap point due to the non-parallel surfaces of attachment -- and created the familiar click-clack sound of IBM's popular Model M keyboard and other old keyboards. The buckled portion of the spring activated the circuit, which generated the keystroke.

rubber dome keyboard
Aaron Siirila, CC by SA 2.5 (Creative Commons BY or BY-SA)

Rubber-dome keyboards

Rubber dome-based keys, which work with the same snapping principle as a toilet plunger, came to prominence in the late '80s and early '90s and are found in many of today's standard desktop keyboards. The key caps push down on the domes, which collapse, closing circuits and recording keystrokes, and then snap back. (This keyboard is shown upside down.)

scissors switches
© Greg Raburn

Scissor switches

Scissor-switch keyboards also have rubber domes but use scissoring mechanisms attached to the key tops to push down the domes. The mechanism, typically found in laptops and thin keyboards, shortens the distance a key must travel to record a stroke, which allows the keys themselves to be shorter.

Vizio Thin + Light ultrabook keyboard
© Vizio

Ultrabook keyboard

As laptops grow ever more svelte, manufacturers are constantly trying to cut costs and make the keyboard smaller -- without sacrificing users' comfort. The Vizio Thin + Light shown here is one of the striving for a comfortable, responsive keyboard in an ultraslim profile. This is no easy task: Laptop makers must weigh ergonomic factors against dimensions, weight, cost and other practical design considerations.

ThinTouch keyboard
© Synaptics

ThinTouch keyboard

Striving to push the envelope for thin yet fully functional laptops, Synaptics' ThinTouch technology replaces scissors and domes with a new type of capacitive sensor that the company says will have about half the travel of a MacBook Air's keys. Synaptics hopes to turn its prototypes into a commercial offering by the middle of 2013.

Tactus microfluidics buttons for touch screens
© Tactus

Tactus microfluidics buttons for touch screens

Other hardware makers, meanwhile, are working to improve typing on smartphones and tablets. Most of these devices rely on virtual keyboards on the flat display surface, which provides no physical feedback for users' fingers.

While incorporating (targeted vibrations) into the screens is the most common solution today, a company called Tactus is taking a different approach with microfluidics "buttons" -- essentially small pouches on the surface of the screen that fill with liquid, appearing only when you need to type. When they're not in use, they deflate, leaving a flat surface. The company hopes to make its technology available to device makers next year.

Twitch Technologies wraparound keyboards
© Twitch Technologies

Twitch Technologies wraparound keyboards

Twitch Technologies proposes another solution for the touch-screen typing problem: a pair of one-handed keyboards that wrap around the left and right edges of tablets. Your fingers type on the back of the device and your thumbs on the front, and you use finger combinations to type letters -- for example, depressing your left pinky and right thumb might get you an A -- rather than one key per letter for the QWERTY layout. (This product is still in the concept stage.)

A former Wired writer, Caleb Garling is a staff writer for the San Francisco Chronicle covering technology and business.

Copyright © 2012 IDG Communications, Inc.

Related Slideshows