Micro-wind turbines can recharge cell phones
A Taiwan company is already working with researchers on designs
Computerworld - Researchers at the University of Texas at Arlington have designed a miniscule wind turbines with a micro-generator that can be used to recharge mobile devices.
Smitha Rao, a university research associate, and J.-C. Chiao, an electrical engineering professor, designed the micro-wind turbines. The two have filed for a patent for the devices, which are about 1.8 mm at their widest point.
A single grain of rice could hold about 10 of the tiny devices, and the researchers believe hundreds of them could be embedded in a cell phone sleeve for recharging purposes. Once the sleeve is on the phone, a user would simply wave the device in the air or set the phone in a windy place to get the tiny propeller blades turning, allowing the micro-generators to produce electricity.
The researchers' work attracted the attention of Taiwanese electro-mechanical fabrication company WinMEMSTechnologies, which has the researchers brainstorming on designs.
"The company was quite surprised with the micro-windmill idea when we showed the demo video of working devices," Rao said in a statement. "It was something completely out of the blue for them and their investors."
The idea for the windmills was originally a blend of origami concepts and conventional wafer-scale semiconductor device layouts created so the complex 3-D moveable mechanical structures can be self-assembled from two-dimensional metal pieces using planar multilayer electroplating techniques.
"The micro-windmills work well because the metal alloy is flexible and Smitha's design follows minimalism for functionality," Chiao said in a statement.
Once WinMEMS became interested in the research, it started a relationship with UT-Arlington. Company representatives visited with the UT-Arlington team several times last year to discuss collaboration. An agreement between the school and WinMEMS allows UT-Arlington to hold the intellectual property rights to the micro-windmills while WinMEMS explores commercial opportunities.
The micro-wind turbines include gears, inductors, pop-up switches and grippers. All of those parts are as tiny as a fraction of the diameter of a human hair.
"It's very gratifying to first be noticed by an international company and second to work on something like this where you can see immediately how it might be used," said Rao. "However, I think we've only scratched the surface on how these micro-wind turbines might be used."
The micro-wind turbines were tested successfully in September 2013 in Chiao's lab. The windmills operate under strong artificial winds without any fracture in the material because of the durable nickel alloy and the aerodynamic design.
"The problem most MEMS designers have is that materials are too brittle," Rao said. "With the nickel alloy, we don't have that same issue. They're very, very durable."
The micro-wind turbines can be made in an array using batch processes. The fabrication cost of making one device is the same as making hundreds or thousands on a single wafer, which enables for mass production of very inexpensive systems.
"Imagine that they can be cheaply made on the surfaces of portable electronics," Chiao said, "so you can place them on a sleeve for your smart phone. When the phone is out of battery power, all you need to do is to put on the sleeve, wave the phone in the air for a few minutes and you can use the phone again."
Chiao said because of the small sizes, flat panels with thousands of windmills could be made and mounted on the walls of houses or building to harvest energy for lighting, security or environmental sensing and wireless communication.
Lucas Mearian covers consumer data storage, consumerization of IT, mobile device management, renewable energy, telematics/car tech and entertainment tech for Computerworld. Follow Lucas on Twitter at @lucasmearian or subscribe to Lucas's RSS feed . His e-mail address is firstname.lastname@example.org.
Read more about Emerging Technologies in Computerworld's Emerging Technologies Topic Center.
- Best iPhone, iPad Business Apps for 2014
- 14 Tech Conventions You Should Attend in 2014
- 10 Desktop Apps to Power Your Windows PC
- How to Add New Job Skills Without Going Back to School
- Slideshow: 7 security mistakes people make with their mobile device
- iOS vs. Android: Which is more secure?
- 11 sure signs you've been hacked
- Shifting Gears: The Value of Customer-Driven Quality in Manufacturing In today's competitive manufacturing market, the customer must be the center of the quality universe. This paper details how manufacturers can improve customer...
- Aberdeen Group: Marketing Analytics for Manufacturing: Forging Customer Insights There are no recalls for poor marketing. Manufacturers need to get their customer intelligence and messaging right the first time. Learn how.
- Unlocking the Promise of Demand Sensing and Shaping through Big Data Analytics Many organizations have limited insight into big data. These limitations have significant opportunity costs and can have a negative effect on identifying and...
- The Brave New World of Customer-Centric Manufacturing The Unique Opportunity for Manufacturers to Better Understand their Consumers
- Webinar: Building a Big Data solution that's production-ready Big data solutions are no longer just a nice-to-have.
- Meg Whitman presents Unlocking IT with Big Data During this Web Event you will hear Meg Whitman, President and CEO, HP discuss HAVEn - the #1 Big Data platform, as well... All Emerging Technologies White Papers | Webcasts
As emerging technologies evolve they often find an initial niche in highly specialized scenarios, or in specific industry verticals, before expanding to wider areas of applicability. Within these initial niches, the early adopters can be anything from digital enthusiasts to fashionistas, or they can be folks simply using the technology because it serves a specific need extremely well. (free registration required) more