3D printing techniques will be used to construct buildings, here and in outer space
'Contour Crafting' can be used to build the shell of a 2,000 square foot house in less than 20 hours
Computerworld - SAN JOSE -- Within a couple of years, researchers at the University of Southern California believe 3D printing techniques will be used to construct entire buildings in less than a day.
As outrageous as it sounds, such machines can already extrude concrete walls with internal reinforcement fast enough to complete the shell of a 2,000-sq. ft. house in under 20 hours.
The technology was demonstrated this week at the Inside 3D Printing Conference and Expo here.
The robotic extruding method, called Contour Crafting, is comparable to its smaller 3D desktop printer counterparts in that it takes its orders from CAD software, which stores and executes the architectural designs. The designs can be customized on a construction site even as work is underway.
The machines can also automatically embed all the conduits for electrical, plumbing and air-conditioning, as well as place electronic sensors to monitor the building's temperature and health over time.
Behrokh Khoshnevis, a professor of industrial and systems engineering at the USC's Viterbi School of Engineering, is leading the effort to perfect the Contour Crafting construction technology.
Khoshnevis said that he expects the technology will be commercially viable within two years.
Contour Crafting could help solve one of the largest problems facing the world today, a lack of decent housing for more than a billion people, Khoshnevis said.
Today, construction is slow, labor intensive, inefficient -- and the most hazardous job in the world, with 400,000 people injured 6,000 to 10,000 killed in construction accidents every year in the U.S. alone.
"It is wasteful and emission causing and corruption prone. And, the cost is always over budget," Khoshnevis said. "What we aspire to do is create neighborhoods that are dignified at a fraction of the cost, a fraction of the time and far more safety with beautiful architectural designs."
Structures not only can be constructed of concrete but also of hybrid materials. For example, the outer shell of a wall can be plaster with polymer or cement filler. Steel reinforcement in for form of coils can also be added to the mix.
A Contour Crafting-machine, which is made up of a metal gantry frame, along with the robotic extruding system, weighs about 500 pounds. It comes in two pieces and can be quickly erected on a construction site, Khoshnevis said.
The gantry frames can be modified to climb structures, creating one story at a time until it reaches the top of a building. Then the robotic gantry could climb back down the sides of the building.
Each layer of concrete extruded by the machine is four inches thick and about six inches in height. Using special hardeners in the concrete, the material is hard enough to support the next layer by the time the machine circumnavigates the outside perimeter of a structure.
Because the materials are extruded through a nozzle, the walls of a building can take any form - thus the name "Contour Crafting."
- Research on bendable glass could lead to flexible mobile phones
- Smart highways and driverless cars coming in 2030 -- for real?
- Google phone project could transform smartphones
- Swarm of bat-like flying robots could hunt for survivors or terrorists
- Scalpel. Check. Robot. Check. NASA bots, one day, may operate in space
- Gov't developing smart suits to protect U.S. troops from bio attacks
- California fights drought with big data, cloud computing
- Robots closer to being able to work together as a team
- Why wearable computing is waiting for A.I.
- 3D graphene-like material could lead to super electronics
- 15 Non-Certified IT Skills Growing in Demand
- How 19 Tech Titans Target Healthcare
- Twitter Suffering From Growing Pains (and Facebook Comparisons)
- Agile Comes to Data Integration
- Slideshow: 7 security mistakes people make with their mobile device
- iOS vs. Android: Which is more secure?
- 11 sure signs you've been hacked
- Shifting Gears: The Value of Customer-Driven Quality in Manufacturing In today's competitive manufacturing market, the customer must be the center of the quality universe. This paper details how manufacturers can improve customer...
- Aberdeen Group: Marketing Analytics for Manufacturing: Forging Customer Insights There are no recalls for poor marketing. Manufacturers need to get their customer intelligence and messaging right the first time. Learn how.
- Unlocking the Promise of Demand Sensing and Shaping through Big Data Analytics Many organizations have limited insight into big data. These limitations have significant opportunity costs and can have a negative effect on identifying and...
- The Brave New World of Customer-Centric Manufacturing The Unique Opportunity for Manufacturers to Better Understand their Consumers
- Webinar: Building a Big Data solution that's production-ready Big data solutions are no longer just a nice-to-have.
- Meg Whitman presents Unlocking IT with Big Data During this Web Event you will hear Meg Whitman, President and CEO, HP discuss HAVEn - the #1 Big Data platform, as well... All Emerging Technologies White Papers | Webcasts