Skip the navigation

Six home networking technologies to watch

Three main wired and three wireless systems are being showcased at CES

By Stephen Lawson
January 7, 2013 02:07 PM ET

IDG News Service - Most of the tablets, TVs, ultrabooks and smartphones on display at International CES this week ultimately are bound for someone's home, where they'll have to talk to each other. Six major home networking technologies to make that happen will be on display at the show, some of them making significant strides to keep up with the demand for instant information and fun.

Consumers who can't get by with just a Wi-Fi access point most often use technologies that send signals through TV cables or electrical wiring. Both types will be on hand in Las Vegas, with their proponents sharing a demonstration area called the TechZone to show off what they can do for a hypothetical home. The HomeGrid Forum, a relative newcomer, will demonstrate the power of products based on the G.hn standard, which spans both types of wires as well as phone lines.

If home networks have a sexy side, it's wireless, and that segment will be crowded, too. Wi-Fi is how most consumers connect to their networks no matter what else they may be using. It's getting faster, while two other wireless systems -- WiGig and WirelessHD -- also are jockeying for position to carry high-definition video.

Video viewing on phones and tablets is a big driver of home networking demand, said Parks Associates analyst Brett Sappington. While consumers prefer wireless, the data-heavy content that carriers and cable and satellite operators are delivering boosts the need for bandwidth within homes.

"You're typically going to have a blended wired and wireless connection in the home, simply because through the wired connection, you can get higher throughput," Sappington said. The effects of walls and other objects on wireless signals can also make wireless systems less predictable.

Though consumers can go out and buy many home networking products themselves, anything beyond a Wi-Fi router is typically prescribed and installed by a service provider, he said.

"Doing wired home networking is still technically challenging," Sappington said.

Here's are some of the main technologies out there to tie all your stuff together:

1. Wi-Fi

Some form of Wi-Fi is a given in just about any mobile or even stationary device, and every other kind of home network can tie into it. This year, its latest and fastest version, based on the emerging IEEE 802.11ac specification, is expected to come into phones and tablets in a big way. Broadcom, a major supplier of networking chips, said in a CES preview last month that its new 802.11ac chips for the smaller devices would come out in phones early this year. Those chips can run at about 300M bps (bits per second), several times as fast as current Wi-Fi in phones, and use less power because they can finish transmitting and get off the airwaves sooner, Broadcom says. Laptops and routers are already on the market with bigger 802.11ac radios that have the potential to deliver about 1G bps of throughput

2. WiGig

For even higher speeds, the Wireless Gigabit Alliance is pushing WiGig, a system that taps into gobs of unlicensed, barely used spectrum up in the 60GHz range. Those frequencies don't travel too far, but WiGig is aimed at connecting to things nearby, point to point. For example, it can be used to dock a thin and light computer to a monitor and peripherals without the need for Ethernet ports and other connections. WiGig may also be used to send high-definition video streams to a TV for viewing or gaming, its backers say. Its top speed now is about 7G bps, and it may go much higher. Right before this year's show, the Wi-Fi Alliance said it would take over development and promotion of WiGig. That should help ensure the two systems work well together, though WiGig still won't be called Wi-Fi.

Reprinted with permission from IDG.net. Story copyright 2014 International Data Group. All rights reserved.
Our Commenting Policies