Migrate to Windows 7--Slowly, Part 2

By Rick Broida

October 23, 2009 06:09 PM ET

Comments

(2)

Comments

Active Comments

Chip Diehl says: There is no reason to use Widows 7 folks. Provide any "compelling" reason why customers need to burn money, delete...

Read the rest | Reply

Greg/Raxco Software says: Instructions on using PerfectDisk to get the best shrink of a drive can be found at (Link to related site.) - Greg/Raxco Software...

Read the rest | Reply

All Comments (2) | Post New

PC World - As I wrote the other day, I'm making my way to Windows 7 a little bit at a time. It's getting a fresh install on a new hard-drive partition, then a gradual load of software, settings, and data.

If you're interested in taking the same approach, your first step needs to be partitioning your hard drive. Vista has a built-in partitioning tool, but you may need third-party software to take full advantage of it. (Windows XP users should check out Easeus Partition Manager, a free utility.)

Keep in mind that this requires a reasonably large drive, preferably one with at least 50GB of free space--more if you have a lot of video files and other data you'll be copying over from the old partition. (On my system, which has a 750GB drive, I'm creating a 300GB partition for Windows 7.) Here's how:

1. To create a new partition in Vista, click the Start button, type diskmgmt.msc, and press Enter to open the Disk Management utility.

2. In the Volume column, find your C: drive, right-click it, and choose Shrink Volume.

3. Vista will calculate how much "shrinkage" is allowed. And here's where you may run into trouble. My aforementioned 750GB drive had close to 400GB free, but Disk Management was willing to shrink the partition by only about 80GB. That would have been fine, but I wanted more breathing room. Thus, I turned to PerfectDisk, a drive-defragmenting utility that can perform the all-important function of moving system files to the beginning of the partition, thus freeing up much more of the available space. (You can find out more in this Ghacks post.)

4. With that step done (or not, if you're okay with Vista's default findings), enter a size for your new volume (I entered 300000 for 300GB, for example) and click OK. After a few minutes, Disk Management will show you a new "Unallocated" space on your drive.

5. Right click Unallocated, choose New Simple Volume, and then follow the steps indicated by the utility.

When you're done, you'll have a brand spankin' new partition that's ready to receive Windows 7. I'll cover that part of the process next week. Stay tuned!

Reprinted with permission from

For more PC news, visit PCWorld.com.
Story copyright 2009 PC World Communications. All rights reserved.

Comment Recommend Digg Twitter ShareThis

Email Print Send Feedback Reprints

Jump to comments

Microsoft

Additional Resources

WHITE PAPER

Do You Know the 7 Steps to Successful Data Migration?

Approximately 60 percent of data migration projects overrun time or budget, while some fail completely. Download this white paper, "Enhancing Your Chance for Successful Data Migration," to learn the critical steps you need to take to execute a data migration project with minimum cost and risk to your business.

WHITE PAPER

Total Cost of Ownership of Server Computing Vs. PCs

Read the Gartner research note to learn why the TCO of a server-based computing deployment used to deliver all applications to users is around 50% lower than that of an unmanaged desktop deployment.

WHITE PAPER

IDC White Paper: Linux in a Global Recession

Economic downturns have a tendency to accelerate emerging technologies, boost the adoption of effective solutions, and punish solutions that are not cost competitive or that are out of synch with industry trends. This IDC White Paper presents the results of an IDC survey of 330 companies in Western Europe, Asia/Pacific and the Americas that measures the receptiveness to Linux and takes into consideration changing views driven by the disruptive economic environment that businesses face today.