Alcatel-Lucent grows switching and virtual networking portfolio

Unveils 40G campus/data center switch with SDN, VXLAN and automation

Data matrix networking connections system
Credit: Thinkstock

Alcatel-Lucent Enterprise this week rolled out a new switch and software enhancements designed to simplify network operations through automation and design flexibility.

Alcatel-Lucent Enterprise became independent from Alcatel-Lucent last fall. Alcatel-Lucent is being acquired by Nokia for over $16 billion, but Alcatel-Lucent Enterprise is not part of the deal.

+MORE ON NETWORK WORLD: Eyes turn to Ericsson, Juniper+

The new switch is the OmniSwitch 6900-Q32, a campus core and data center top-of-rack device for companies requiring a low latency scalable and programmable fabric.

The 6900-Q32 features 32 40Gbps QSFP Ethernet ports that, through the use of splitter cabling, can also be divided into 104 10G ports. It supports OpenFlow 1.3 for software-defined networking, VXLAN gateway capabilities in hardware for VXLAN to non-VXLAN connectivity and Alcatel-Lucent’s Intelligent Fabric (IF) software, which now has several automation enhancements.

Those enhancements include self-configuration, which allows Alcatel-Lucent switches to be unwrapped and cabled. The IF software automatically configures the network, Alcatel-Lucent says.

The IF software also supports self-attachment, which configures access switches, servers, virtual machines, applications and third-party switches and devices so that they interoperate. For physical and virtual integration, IF identifies VMs in VXLANs as well as in applications across the physical infrastructure, and provides quality of service, security and prioritization for both, Alcatel-Lucent says.

As new applications and VMs are introduced or moved, IF creates a virtual network profile of QoS, prioritization and security for them across the physical and VXLAN network.

The IF software can also now reconfigure the network after failures to support 24x7 uptime, Alcatel-Lucent says. It also detects new, changed or relocated switches, applications, devices and servers and automatically updates the configuration, Alcatel-Lucent says.

For SDNs, in addition to OpenFlow 1.3, IF supports an OpenStack plug-in, RESTful APIs and embedded Python scripting. The software is also integrated with SDN controllers from NEC.

Alcatel-Lucent also enhanced its OmniVista 2500 management software for the new software and switch. The software now provides “Top ‘N’” reporting on network statistics, including VXLAN; user-defined reports; predictive network analytics for capacity planning; and VM policies for the virtual network profiles of VXLAN-based applications.

The 6900-Q32 switch and IF software are available now. IF also runs on Alcatel-Lucent’s OmniSwitch 10000, and will be added to the OmniSwitch 6860 access switch later this year.

The OmniSwitch Q-32 costs $1,540 per port with direct attach 1m optics.

This story, "Alcatel-Lucent grows switching and virtual networking portfolio" was originally published by Network World.

To express your thoughts on Computerworld content, visit Computerworld's Facebook page, LinkedIn page and Twitter stream.
Windows 10 annoyances and solutions
Shop Tech Products at Amazon
Notice to our Readers
We're now using social media to take your comments and feedback. Learn more about this here.